Details of Transportation and Food arrangements/(Theme AUTOMOBILE event on Sunday 31/10/2010)

Transport:


One Bus has been arranged for the registered participants of the Theme Automobile in the following route:

Autonagar Boys Hostel (8:00 am) – Autonagar Gate – Patamata – NTR Circle – Eenadu - Benz Circle(Varun motors – 8:10 am) – DV Manor – Fortune Murali Park – Gateway – Indira Gandhi municipal stadium – PWD Grounds – Pandit Nehru Bus Station(8:20 am) – Old Bus Station - Fire Station – American Hospital - Varadhi (8:30 am).

The Bus will halt for 10 to 15 minutes at Varadhi and will leave varadhi at 8.45 am.

Participants from Guntur may board the bus at Kunchanapalli Bridge around 8.45 am.

Food:

Working lunch and Snacks will be provided. However, the participants are requested to bring their own water bottles.

Venue:

Room number F111 in the FED block

Schedule:

9:15 – 10:15 am Introduction/ opening remarks

10:15 – 11:15 am Transmission Trends-1

11:15 – 11:45 am Break

11:45 – 12:45 am Transmission Trends- 2

12:45 – 13:30 pm Emission Norms and Testing

13:45 – 14:30 pm Lunch Break

14:30 – 15:30 pm Case Study -1

15:30 – 16:30 pm Case Study- 2

16:30 – 17:00 pm Felicitation and Closing

17:15 pm Disperse

Theme AUTOMOBILE

come register..!!

THEME AUTOMOBILE Ignite the Fuel In You…. Accelerate your Spirit…. Lubricate your Thoughts…. Exotic Track Right In Front of You….
Registrations are in Progress
Registration Details		Contacts
For ASME student members:  Rs 250* For Non-ASME members      :  Rs 350* Registration Time & Venue    :   12:40 to 13:30 hrs, M129 Last date for registrations   : 22/10/2010		P. Prem Chand, II/IV ME. Email: premchand.asme@gmail.com Ph.no: +919492982549 www.asme-klu.blogspot.com
*Registration fee is for all the events *Field trip is limited to the first 100 registrations

Date	Event
Wed 20th Oct	Quiz part 1 (Chapter 2,written)
Sat 23rd Oct	1.     9.15-10.15 -PPT Presentation by ASME members 2.    10.15 to 11.15-Quiz part 2(chapter 3 and 4,written) 3.    11.45 to 12.45-Poster Presentation/ Innovative Ideas/ Auto News 4.    12.45 to 13.30-Know Your Transporter 5.    14.30 to 15.30-Case Studies by ASME members 6.    15.30 to 16.30-Pollution Awareness Camp
Wed 27th Oct	Quiz Part 3 (Chapter 5, Chapter 6, written)
Sat 30th Oct	Field Visit to Automobile workshops in and around Vijayawada (Time to be announced shortly)
Sun 31st Oct	1.     09.15to10.15   -Intro. of ARAI & The Speaker 2.    10.15 to 11.15-Transmission Trends – 1 3.    11.45 to 12.45-Transmission Trends – 2 4.    12.45 to 13.30-QUIZ Final Round 5.    14.30 to 15.30-Emission Norms and Testing Procedures 6.    15.30 to 16.30-Real World Case Studies

Check Points!!
Event	Brief Description
Quiz	The quiz competition is to develop a basic understanding of the various concepts related to Automobiles. The event will be conducted in four parts, the first three being written format, will serve as preliminary round for eliminations. The selected participants will be grouped into teams to compete in the final oral format round.
Seminars(Power Point Presentations)	As, the subject Automobile Engineering is not in the regular curriculum it was felt that a series of lectures be delivered on the fundamental aspects of automobiles for moving forward with the theme. A number of ASME members have volunteered to deliver talks on the topics of their interest, which are being presented as per planned schedule.
Poster Presentations	Under this category, members will be showcasing the current as well as future trends in the automobile sector as a poster. Examples of topics include: Green Vehicle Technologies, Hybrid Vehicles, Emission Norms and Control Technologies, Safety Engineering, Transmission Technologies, Combustion Engineering, Aesthetics, Crash Testing and Analysis, to name a few.
Auto News	In this event the members are encouraged to visit the official websites of various automobile companies and also go through automobile magazines, to follow latest happenings in the industry and present the information as a News Reading activity. Wherever possible the news would be supplemented by video clippings of the happenings.
Innovative Ideas Presentations	In this event the students will be presenting their own ideas on various aspects of Automobile Engineering, which need to be properly molded to put them into application. A direction for their work will be provided by an expert in this field, so that innovations are promoted leading to projects, entrepreneurial development.
Know Your Transporter	Being engineers we ought to know the technologies that we use in our daily life. Under this event students will identify technological breakthroughs introduced by various automotive companies and present these technologies. Topics that are addressed can include DTSi, CRDi, MPFi, Tubeless Tyres, Alloy Wheels, Safety Air Bags, Power Steering, Aerodynamic design, to name a few.
Case Studies Presentations	Under this event, the students will choose one of the automobile companies and present its historical developments that revolutionized the Automobile Field.
Expert Lecture	The members will get a chance to have one-to-one interaction with an expert from the automotive industry under this event. Mr. Ganesh K from ARAI Pune will be interacting with the members and deliver a series of talks in the areas of Emission Control Norms, Trends in Transmission Technology. The speaker shall also be sharing his experiences on some real time case studies.
Field Trip	In this event the students will visit an industry/workshop to get a glimpse and feel of the actual procedures followed by the industry. The students not only get an opportunity to observe the various components that go into an assembly, but also different tools and their methods of usage.
Pollution Awareness Camp	Service to the society is the social responsibility of every engineer. In accordance with the theme Automobile Engineering, we are organizing an awareness camp on pollution caused by automobiles. As a part of this our members shall reach to the public and enlighten them on the ill effects of pollution and suggest ways and means of reducing the pollution. As a motivation we shall be arranging free pollution checkup for about 100 personal vehicles in the near by villages, Kunchanapalli, Vaddeswaram and Revendrapadu.

theme AUTOMOBILE , roars to life...!!

Finally , we are rolling , as the AUTOMOBILE theme has roared to life..With the seminars on various categories of automobile engineering. 

1.     Mr. Shashi Kiran (09101481,sec-c) and E.Varun(09101287,sec-E) has presented a seminar on “Overview of Automobile Engineering” .

2.     Mr.Sk.Nazeer Ahmed (09101237,sec-D), Satish Chandra (09101232,sec-D) and Nikhil Kumar Jain (09101454, sec-D) has presented a seminar on “Components of  an Automobile”.

3.     Mr.Sai Tejesh (09101478,sec-E) has presented a seminar on “Mechanism Of Gears”.

 
 

POSTER and LOGO Design COMPETITION.

News for all those who are interested in designing logo and poster..!!

• Design a logo for KLU-ASME student section with a caption for it.It  should have  "KLU-ASME " and the Logo of our University (gear) should go back of the name (as in ASME logo, the globe should be replaced by the gear.).
• Design a poster for the ongoing theme Automobile, with all the events being displayed on it.

Last date for submission : 17th oct 2010.
Act fast, Act smart...!!  inspiring prizes to be won..!! 
                                          FOR DETAILS CONTACT: 
                                         P.PREM CHAND,II/1V,ME,
                           premchand.asme@gmail.com, 9492982549.

Theme AUTOMOBILE

Ignite the fuel in you...
Accelerate your spirit...
lubricate your thoughts...
Exotic track right in front of you...!!!

check points:

• Guest lecture
• Quiz
• Case Study
• poster presentation
• industrial visit
• know your transporter
• Ideas

We know you got automotive instincts...
Register soon to be a part..

                              **for details contact:
                                           PREM CHAND P,(2/4)ME
                       mailto:premchand.asme@gmail.com ,9492982549

compete to EXCEL...!!

     PROBLEM STATEMENTS  FOR  COMPETITION...

1. 
   
               Develop LabVIEW code for following condition
   If the temperature of the room is less than Min. temp. then indicate  COLD Alarm Indication
   If the temp. of the room is greater than Max. temp. then indicate by HOT Alarm Indication
   If the temp. of the room greater than min. temp and less than max. temp., then indicate by Normal Alarm Indication
   
   
   2.       Develop Fibonacci Series using LabVIEW
   3.       Develop LabVIEW code to check whether entered number is prime or not
   
   
   All the solutions  will be considered  if they sent as a .vi file.
   Send your answers to premchand.asme@gmail.com.
   The last date for sending your answers : 15th Oct-2010.
                                                         for any further details contact:  P.Prem Chand (2/4),ME
                                                                                                                   9492982549
      ** if any workshop participant needs the software to be installed/reinstalled,
   

   1.        He/She may send a mail to Prof. Shyam Prasad at ksp_me@klce.ac.in with the subject "LabVIEW software" OR
   2.        Come with your  laptops on 06/09/2010 during lunch break to Shyam Prasad K, Professor, Dept of Mech. Engg.
      
      
   
   
          
   
   
   
   

Workshop MANIA...!!!

    The workshop organized  by the KLU-ASME STUDENT SECTION  on LABVIEW ,in association with the National Instruments,conducted by Sri.Visweswaran Jagadeeshan, was attended by 157 students of all disciplines.The response is phenomenal and the participants really enjoyed learning the software.This  really gave a leap to the organizers to be back with something more exceptional the next time.                            
                                         
                                  *All those who haven't received their certificates, can meet K.Shyam Prasad sir,Professor in mechanical engineering,in Mechanical department..

THANK YOU ALL....

                 "THANKS A MILLION..!!!"

for making the inaugural a magnum opus.....

Inaugural ceremony of the KLU-ASME STUDENT SECTION.

The much awaited  KLU-ASME student section was inaugurated formally on 25th of SEP-10,in a remarkable way.The inaugural ceremony was graced by guest of honor Mr.P.Sandesh,Managing Director of Coolex industries,vijayawada,Dr.G.L.Datta,Vice Chancellor, Dr.B.S.N.Parashar, Dean of academic,Dr.Y.V.S.S.S.Prasad Rao ,Distinguished professor in Mechanical  Engineering, Dr.Y.V.Hanumantha Rao,Head Of The Department(ME), K.Shyam Prasad, Faculty adviser,Professor in Mechanical Engineering and Visweswaran Jagadeeshan,work shop resource person from National Instruments.

 Glimpses of the inaugural ceremony...

                    Guest of Honor,Mr.P.Sandesh and Honorable Vice Chancellor Dr.G.L.Datta,had declared the KLU-ASME student section open as a fully functional body in a traditional way by lighting the lamp. Prof. K.Shyam Prasad ,faculty adviser of KLU-ASME student section ,had congratulated the students who had been highly phenomenal in making the program a big success.He said that  the new trend is,growing in a multidisciplinary track  and ASME is no more only meant for Mechanical engineers.
                              Dr.G.L.Datta, Vice Chancellor ,had defined KLU-ASME student section as a place where the students can develop their leadership and technical skills and its a matter of pride,being in a society like ASME.Dr.B.S.N.Parashar,dean academics ,has enlightened the students by saying that soft skills is what counts for an engineer and that is what ASME can give.He adviced the students to be engaged with such organizations and hone up their skills in free time.Dr.Y.V.S.S.S.Prasad Rao sir,told that ASME is an age old organization that has been setting the standards for the industries.Dr.Y.V.Hanumantha Rao sir, Head Of The Department,ME,had advised the students that,events should be conducted at a regular pace to keep the organization alive and helpful.
                   The KLU-ASME student certificate was officially unveiled by the guest of honor,Mr.P.Sandesh.The inaugural was followed by the workshop on LABVIEW software by Visweswaran,which was attended by 157 students of all disciplines.

Workshop on LABVIEW

"Got a laptop..??  Why not try something new..??"

KLU-ASME student section kicks off with the workshop on LABVIEW  software, in association with the National Instruments.

• Know the new , programming..????  not exactly, its "graphical programming.."
• Nothing like before..!!

click here for web links..

       
 

Inception of KLU-ASME STUDENT SECTION.

The KLU -ASME  STUDENT SECTION is all set to hit the ground running with its inaugural ceremony on 25th Sep-10.With the cutting edge 12 brand new themes in its playlist, its empowered  to make the students true technocrats.workshops,seminars,guest lectures,projects,competitions and many more on track..!!
                          "got some interest ..??  we got room for  you..."

             The entirety of the section is run by the students itself.this provides a rostrum for them to enhance their technical skills and add value to their ideas.The motto of this section is exposing the students to the global trends ,latest technologies and nurturing them to be a professional at work.
             The idea is simple..., learn to do and do the learnt...  

ASME-KLU Initiative

• ASME-The Student Design Competition

Basic Problem Description:

Recycling is a global industry accounting for more than 1.5 million jobs and $100 billion in annual revenue. As a whole, the industry currently processes more than 600 million metric tons of material annually, growing with the expansion of the global, green economy. This global expansion presents an increased need for new, efficient and cost?effective waste material sorters. The goal of the 2010 ASME Student Design Competition is to design, build, and test an autonomous system capable of accurately sorting common recyclable materials, namely ferrous and non?ferrous metals, plastics and glass into distinct waste containers. Your job is to design, build, and test a system capable of rapidly and accurately sorting the four waste materials noted above into distinct waste containers. This system must operate autonomously and be capable of both material identification and waste handling. Points will be awarded based on the proper identification and handling of the waste materials, as well as the speed required to process the materials and the weight of the device.

Click here to download the complete Problem Statement for ASME Student Design Competetion.